Epson Runsense SF-110 User Manual page 22

Gps sports monitor
Hide thumbs Also See for Runsense SF-110:
Table of Contents

Advertisement

User Manual
After placing the device into the bottom of the cradle, push carefully on the top of the device until it is fixed in
place.
c
Important:
Make sure the device is placed in the correct direction; otherwise, the device or the cradle could be damaged.
When the device is placed in the correct direction, the alarm sounds, the following screen is displayed, and
charging starts.
Although the average time necessary for a full charge is 2.5 to 3.5 hours, this varies depending on the situation.
C
Check that charging is complete.
When the following charging icon is displayed, charging is complete.
Note:
When the battery icon displays 100%, an over-charge prevention function is activated. The device will not be damaged
even if you continue to charge the battery.
Preparing and Basic Operations
22

Advertisement

Table of Contents
loading

Table of Contents