Step 3: Attaching The Housing On The Xy Frame - Ultimaker Original+ Assembly Instructions Manual

6.3.3.

Step 3: attaching the housing on the XY frame

The following parts are needed in this step.
Letter Description
X and Y axes
A
bolts M3 x 30mm
B
hex nuts 3mm
C
A
4 x
B
E
image 63: parts needed for this step
To attach the housing on the XY frame, perform the following actions.
1. Place a wooden part C into the LEFT slider block, see image 64.
5 Notice: do not tighten yet.
image 64: moving the wooden part C in the LEFT slider block.
2. Move X and Y axes in the extuder head, see image 65.
5 Notice: make sure the extruder head is placed inside the machine,
below the slider blocks.
Step 3: attaching the housing on the XY frame
Qnty.
2
4
4
4 x 4 x
C D
Letter Description
wooden parts C
D
spacers
E
2 x
Assembling the extrusion head
Qnty.
4
2
2 x
53