Replacing The License Plate Light Bulb - Yamaha MTN690-U 2019 Owner's Manual

1. Turn signal light bulb
3. Insert a new bulb into the socket,
push it in, and then turn it clock-
wise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not over-
tighten the screw, otherwise the
lens may break.
[ECA11192]
Periodic maintenance and adjustment
Replacing the license plate
1
light bulb
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (to-
gether with the bulb) by pulling it
out.
4
4 3
1. License plate light unit
2. Collar
3. Washer
4. Nut
5. License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
6-34
EAU59890
1. License plate light bulb
3
2
3. Insert a new bulb into the socket.
4. Install the socket (together with
1
5 the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
2
nuts.
1
6