Storage Compartment - Yamaha MTN690-U 2019 Owner's Manual

To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then re-
move the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screw-
driver in its original position, and
then hook the helmet holding ca-
ble over the hook on the bottom of
the passenger seat.
2
1
1. Screwdriver
2. Helmet holding cable
3. Hook
4. Install the passenger seat.

Storage compartment

The storage compartment is located as
shown.
1
1. Storage compartment cover
1
3
1. Storage compartment
3-22
Instrument and control functions
EAU83880 When storing documents, wrap them
in a plastic bag so they will not get wet.
When washing the vehicle, avoid
spraying water directly under the seat.
WARNING
Do not exceed the load limit of
1.5 kg (3 lb) for the storage com-
partment.
Do not exceed the maximum
load of 172 kg (379 lb) for the ve-
hicle.
EWA10962
3