Handlebar Switches - Yamaha MTN690-U 2019 Owner's Manual

Air temperature
1
1. Air temperature display
This shows the air temperature from –9
°C to 99 °C in 1 °C increments. The
temperature displayed may vary from
the ambient temperature.
TIP
hen the temperature is below –9
°C, "Lo" will be displayed.
The accuracy of the temperature
reading may be affected by engine
heat when riding slowly (under 20
km/h [12 mi/h]) or when stopped
at traffic signals, etc.
Instrument and control functions
Brightness control mode
1
1. Brightness level display
The brightness control mode allows
you to adjust the brightness level of the
multi-function meter unit.
To adjust the brightness
1. Turn the key to "OFF".
2. Push and hold the left set button.
3. Turn the key to "ON" and continue
pushing the left set button until the
display switches to the brightness
control mode.
4. Push the right set button to set the
brightness level.
5. Push the left set button to confirm
the selected brightness level and
exit the brightness control mode.
3-12

Handlebar switches

Left
1
2
3
4
1. Pass switch " "
2. Dimmer switch " / "
3. Turn signal switch " / "
4. Horn switch " "
Right
1. Start/Engine stop switch " /
2. Hazard switch " "
EAU1234M
3
1
2
/ "