Replacing An Auxiliary Light Bulb - Yamaha MTN690-U 2019 Owner's Manual

1
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
then connect the coupler.
6. Install the headlight unit as shown,
and then install the washer and
bolt on each side.
Periodic maintenance and adjustment
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
2
6-32
Replacing an auxiliary light
bulb
This model is equipped with two auxil-
iary lights. If an auxiliary light bulb
burns out, replace it as follows.
1. Remove the headlight unit. (See
page 6-31.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
turning it counterclockwise.
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out of the socket.
EAU83660
6
1