Table of Contents
Advertisement
Cleaning and Maintenance
FOOD TEMPERATURES CAN BE
ACCURATELY DETERMINED ONLY
THROUGH THE USE OF FOOD
THERMOMETERS!
Important Operation Tips:
Controls
There are three sets of controls for the hex case, each
behind its own access panel located on the side of the case.
The dial with the numbered settings is for the griddle. The
other dials/switches are for the overhead lights and heating
components.
Overhead Heating System
Cal rod units are located above the griddles to provide
top heat. To obtain the proper food temperatures, they
must be adjusted. Settings may vary depending on
food composition. Maximum limits should be avoided
to prevent overcooking or drying out food.
General Cleaning Rules
1 . Turn temperature control knobs to OFF position.
2. ALLOW SURFACES TO COOL BEFORE HANDLING.
3. Wipe entire unit with clean cloth and mild detergent.
The EXTERIOR surfaces of these hot tables must
be cleaned with a mild detergent and warm water to
protect and maintain their attractive fi nish. Never use
abrasive cleaners or scouring pads.
2. Clean frequently and regularly.
3. Rinse thoroughly after cleaning.
4. Remove surface spills immediately with a damp cloth.
TO REMOVE "BAKED-ON" SPLATTER, GREASE OR
LIGHT DISCOLORATION TO STAINLESS STEEL.
CLEANSING AGENT
Grade F Italian Pumice........Scour or rub with damp cloth
Liquid NuSteel.....................Scour with small amount on
Paste NuSteel
Household Cleansers...........Rub with damp cloth
TO REMOVE HEAT TINT OR HEAVY DISCOLORATION
CLEANSING AGENT
Allen Stainless Steel Polish........Small amount on damp
Birdsall "Staybright" ...................Rub with damp cloth
Wyandotte
Bab-O
Nusteel.......................................Rub with stainless steel
Glass Care
Cleaning
Clean with plenty of nonabrasive soap (or detergent) and
lukewarm water, using the bare hand to feel and dislodge
any caked-on dirt. A soft, grit-free cloth, sponge, or chamois
may be used, but only as a means of carrying the water to
the plastic. Dry with a clean damp chamois or clean soft cloth
such as cotton fl annel. Hard, rough cloths or paper towels
will scratch the acrylic and should not be used.
Stainless Steel Cleaning and Care
There are three basic things, which can break down your
stainless steel's passivity layer and allow corrosion.
53
APPLICATION
dry cloth
APPLICATION
cloth
wool
Advertisement
Table of Contents
