Siemens SIMATIC Panel PC 677 Operating Instructions Manual page 44

Operating and parametrizing
7.1 Startup
7. In the following dialog, click on the screen size that corresponds to your device. The
Figure 7-7
8. Click on "Finish" to end the Panel Wizard.
Figure 7-8
7-6
Notice
If the dialog disappears after the specified time, the calibration settings are discarded and
the touch screen is not calibrated.
Repeat the calibration as specified in the operating instructions for the control unit,
described under "Setting the touch screen" in the "Additional drivers and applications"
section.
Calibration has ended. The device restarts (cold start.)
Setting the key panel
This section applies only to control units with key panels.
display resolution of the device will be adjusted correspondingly.
Keyboard panel, selecting the screen size
Keyboard panel, end Panel Wizard
SIMATIC PC Panel PC 677/877, Control Unit
Operating Instructions, Edition 04/2005, A5E00407724-01