Power Cords; How To Use Lifting Bracket - Westinghouse WGen12000 User Manual

OPERATION

POWER CORDS

Using Extension Cords
Westinghouse Portable Power assumes no responsibility for the content within this table. The use of this table is the
responsibility of the user only. This table is intended for reference only. The results produced by using this table are
not guaranteed to be correct or applicable in all situations as the type and construction of cords are highly variable.
Always check with local regulations and a licensed electrician prior to installing or connecting an electrical appliance.
LIFTING BRACKET
1. Before lifting the generator, inspect the
bracket and make sure it is securely fastened
to the generator. Do not lift the generator
unless the lifting bracket is securely fastened.
2. Hook a chain or strap through the eye on the
lifting bracket and make sure it is securely
fastened.
3. Connect a suitable lifting device to the chain
or strap. Inspect chain and hook for any
damaged links or any defects that could
cause failure. It is recommended to use hooks
with safety latches installed.
4. Lift the generator slightly to ensure it is
lifting straight and level. Adjust the bracket if
required to allow it to lift correctly.
14 | Westinghouse Outdoor Power Equipment
Do not lift anywhere
else than the eye on
the lifting bracket.
Improper lifting could
damage unit.