Advertisement
EMBROIDERY AND DARNING
While embroidery anti darning can be done
on the machine when threaded for regular
sewing, the use of feed cover plate (B. Fig.
36) No. 32622 is recommended, as movable
contact with the feed in some cases might
interfere with the handling of the work.
Do not change the adjustment of the feed
dog in any way as it is essential that its posi-
tion should remain as originally fixed.
When the feed cover plate (B. Fig. 36) is
used it is necessary to lead the needle thread
through the eye in the thread regulator (A,
Fig. 36) at the left of the tension discs, and
not under the thread regulator. With this
exception the threading is the same as for
regular sewing (see Fig. 11).
Remove the presser foot and let down the
presser bar lifter to restore the tension on the
needle thread, which is released and inopera-
tive when the lifter is raised.
To attach the feed cover plate draw to the left
the slide that covers the bobbin case and
insert the downwardly projecting hooks on the
cover plate under the edge of the throat plate
and push to the right. After bringing the hole
at the right of the cover plate in line with the
hole in the throat plate, press the cover
Table of Contents
82387 No. 66
into position, and close the slide (see Fig.
36).
Feed cover plates are not included in the reg-
ular sets of attachments; they are on sale at
all Singer shops at the price of ten cents
each.
28
Previous Page | Next Page
Advertisement
