Advertisement
RUFFLER
Ruffling Between Bands
Place the lower piece of material below the
separator blade, the piece of material to be
ruffled under the ruffling blade and over the
separator blade and the upper piece of mate-
rial over the ruffling blade, as shown in Fig.
30.
TO RUFFLE AND SEW ON
Place the band below the separator blade the
piece to be ruffled between the separator
blade and the ruffling blade, and proceed.
The ruffler should never be operated without
cloth between the blades.
RUFFLER
Five Stitch Ruffling or Plaiting
To make a five stitch ruffle or plait, raise the
adjusting lever (A, Fig. 31) to its highest
point. The ruffling blade will then move for-
ward and back once every fifth stitch.
Table of Contents
82387 No. 66
23
FIG. 30
FIG. 31
Previous Page | Next Page
Advertisement
