Singer 82387 Instruction Manual page 27

UNDER BRAIDER
Remove the presser foot and attach the quil-
ter foot in its place. Attach the under braider
(see Fig. 20) as directed for the shirring plate
(see page 30). The design to be braided must
be stamped or traced on the wrong side of
the goods. Pass the end of the braid back
through the guides in the under braider and
under the quilter foot as shown above. Lower
the quilter foot and proceed to sew.
Table of Contents
82387 No. 66
27
FIG. 35
Previous Page | Next Page