Locking/Unlocking The Control Panel - Lectrosonics HMa-941 Quick Start Manual

Locking/Unlocking the Control Panel

With the controls locked, the AUDIO and FREQ buttons can still be used to
display current settings. Any attempt to change a setting by pressing either
the UP or DOWN arrow button will result in an on‑screen reminder (Loc) that
the controls are locked. Remove the batteries to unlock the control panel.
Important: Once the transmitter is locked, it cannot be unlocked or
powered off using the buttons. The only ways to unlock a locked
transmitter are to remove the battery or unlock it via the remote
control.
www.lectrosonics.com
Simultaneously pressing and holding both the UP
and DOWN arrow buttons during normal opera‑
tion starts the Lock timer. The timer starts at three
and counts down to zero.
When the timer reaches zero, the buttons on the
control panel are locked.
11