Hold Down Arrow At Turn On - Lectrosonics HMa-941 Quick Start Manual

Hold DOWN arrow at turn on.

Hold the DOWN arrow button in while pressing both AUDIO and FREQ but‑
tons to access the setup screens below. It's easier if you lay the unit on a flat
surface and use two hands to press all three buttons at the same time. After
the first screen loads, press the AUDIO button repeatedly to switch between
the settings. Press the UP and DOWN arrow buttons for the desired selection.
After the settings are made, press both AUDIO and FREQ buttons together to
exit and turn the power off.
rc (remote control with mobile app)
Allows the transmitter to respond to remote control "dweedle" tones from a
mobile device, or from tones generated by the Lectrosonics RM and RM2
devices.
on
oFF
PbAc (auto power restore)
Sets the transmitter to automatically turn back on and return to the previous
state after a battery change or power interruption when it is in the operating
mode.
1
0
bL (backlight settings)
Adjusts how long the LCD stays lit after pressing buttons.
5
30
on
6
Enables the remote function.
Disables the remote function.
Restores power automatically
Does not restore power automatically
5 minutes
30 seconds
Stays on
LECTROSONICS, INC.