Restore Factory Settings - Max BC-RT-TRX-CyG-4 Operating Manual

Restore factory settings

12.1 a
ctIvatIng frost protectIon operatIon
swItcheD off
If the room does not need to be heated, the valve can be
closed. The valve is only opened if there is a risk of frost.
The calcification protection continues to run.
In the MAX! House solution you can configure the set-
tings for the MAX! Radiator Thermostat + via the MAX!
software.
In the MAX! Room solution you can configure the set-
tings for the MAX! Radiator Thermostat+ via the MAX!
Wall Thermostat + .
If you use the MAX! Radiator Thermostat + in the MAX!
Radiator solution, proceed as follows:
• Press the Auto/Manu button until Manu appears in the
display.
• In manual mode (Manu), turn the handwheel anticlockwise
until "OFF" is displayed.
• To save changes and leave manual mode, press the Auto/
Manu button again.
13 r
estore factory settIngs
The factory settings of the MAX! Radiator Thermostat + can be
restored manually. Restoring the factory settings deletes all
settings and information about taught-in devices.
44
)
(
raDIator