Teaching-In - Max BC-RT-TRX-CyG-4 Operating Manual

Teaching-in

6 t
eachIng
In order to be able to use the MAX! Radiator Thermostat +
in your installation, you must teach it in first. The teach-in
procedure depends on the system variant used. Choose your
system variant (House, Room or Radiator solution) and fol-
low the instructions below.
MAX! House solution
In the MAX! House solution all settings and program-
mings (e.g. week programs) can be made via the MAX!
software. To teach-in the device to the MAX! Cube,
proceed as follows:
• Put the MAX! Cube into teach-in mode. Start the local MAX!
software and click on "New device" (1).
• To activate teach-in mode on the MAX! Radiator Thermo-
stat + , press and hold down the Boost button for at least 3
seconds. The display shows the remaining teach-in time
in seconds. The teach-in time is 30 seconds.
19
-
In