Activate Heating Pause (Battery Saving) - Max BC-RT-TRX-CyG-4 Operating Manual

Activate heating pause (battery saving)

performing a factory reset or via the MAX! Cube (see sec.
„13 Restore factory settings" on page 44). The code can
only be changed on the device itself and not via the local
MAX! software.
12 a
ctIvate heatIng pause
Battery life can be prolonged by switching the heating off in
summer. To achieve this, the valve is opened fully. The cal-
cification protection continues to run.
In the MAX! House solution you can configure the set-
tings for the MAX! Radiator Thermostat + via the MAX!
software.
In the MAX! Room solution you can configure the set-
tings for the MAX! Radiator Thermostat+ via the MAX!
Wall Thermostat + .
If you use the MAX! Radiator Thermostat + in the MAX!
Radiator solution, proceed as follows:
• Press the Auto/Manu button until Manu appears in the
display.
• In manual mode (Manu), turn the handwheel clockwise
until "On" is displayed.
• To save changes and leave manual mode, press the Auto/
Manu button again.
43
(
battery savIng
)