Max BC-RT-TRX-CyG-4 Operating Manual page 32

Configuration menu
Activate boost function:
• Press the Boost button to activate the boost function.
• The remaining time for the function is counted down in
seconds ("300" to "000"). Whilst the function is active,
is displayed.
• The activity symbol (
ing pin opens/closes the valve.
• Once the set time has elapsed, the MAX! Radiator Thermo-
stat + switches back to the mode that was active previously
(Auto/Manu), with the temperature that was set previously.
• The function can be deactivated prematurely at any time
by pressing the Boost button again.
Adjust duration of boost function and valve opening.
In the MAX! House solution you can configure the set-
tings for the MAX! Radiator Thermostat + via the MAX!
software.
In the MAX! Room solution you can configure the set-
tings for the MAX! Radiator Thermostat+ via the MAX!
Wall Thermostat + .
If you use the MAX! Radiator Thermostat + in the MAX!
Radiator solution, proceed as follows:
• Press the Auto/Manu button longer than 3 seconds.
• Select the menu item "bOS" with the handwheel.
• Confirm with the Boost button.
• Set the duration of the boost function (in minutes) with the
handwheel and confirm with the Boost button.
32
) is displayed as long as the adjust-