Max BC-RT-TRX-CyG-4 Operating Manual page 37

Configuration menu
In the MAX! House solution you can configure the set-
tings for the MAX! Radiator Thermostat + via the MAX!
software.
In the MAX! Room solution you can configure the set-
tings for the MAX! Radiator Thermostat+ via the MAX!
Wall Thermostat + .
If you use the MAX! Radiator Thermostat + in the MAX!
Radiator solution, proceed as follows:
• Press the Auto/Manu button longer than 3 seconds.
• Select the menu item „dSt" with the handwheel.
• Confirm your setting using the Boost button.
• Set the option „On" to activate automatic switching or set
the option „OFF" to deactivate automatic switching with
the handwheel.
• Confirm with the Boost button.
10.8 s
ettIng offset temperature
As the temperature is measured on the radiator, the tem-
perature distribution can vary throughout a room. To adjust
this, a temperature offset of ±3.5 °C can be set. If a nominal
temperature of e.g. 20 °C is set but the room presents with
only 18 °C,an offset of -2.0 °C needs to be set.
If you use the MAX! Radiator Thermostat+ in connec-
tion with a MAX! Wall Thermostat + , the temperature
will be measured at the MAX! Wall Thermostat.
37
( of)
t