Kompernass CR 5 A2 Operating Instructions Manual page 19

Motion detection
If you access this menu option, you can then use the ▲▼ buttons
deactivate this function . Confirm your selection with the
the list of menu items .
When this function is activated, the device will automatically stop the video
recording when no moving images are detected . If the device again detects move-
ments, the device will automatically begin recording again . If the function
is deactivated, the device does not stop recording if no motion is detected .
NOTE
► You should only activate this function while the vehicle is parked if you want
to automatically film a break-in attempt or to record the other vehicle after a
collision .
► The initial recording with this function must be started manually .
Audio recording
If you access this menu option, you can then use the ▲▼ buttons
deactivate audio recording via the built-in microphone . Confirm your selection with
the / button
■ 16 │ GB │ IE
to return to the list of menu items .
/ to activate or
/ button to return to
/ to activate or
CR 5 A2