Ford FIESTA ST 2018 Supplement Manual page 16

Enhanced Torque Vectoring
Control
Enhanced torque vectoring control is
comprised of two elements:
• Torque vectoring control which applies
brake torque on the inner wheel in a
curve for better traction and less
understeer.
• Cornering understeer control which
controls the yaw response of your
vehicle when you accelerate on high
and low friction surfaces.
No action is required to activate torque
vectoring control. It operates automatically
due to vehicle operating conditions.
Unlike electronic stability control,
enhanced torque vectoring control does
not slow the vehicle but does help control
excessive wheel slip and gives the vehicle
cornering agility. The system only increases
performance. Because of this, enhanced
torque vectoring control is not disabled
when the AdvanceTrac system is off.
2018 Fiesta ST (CCT) ST, Canada/Mexico/United States of America, JE8J 19A285 HA enUSA, Edition date: 201706, First Printing
Stability Control
(If Equipped)
13