Making The Water Supply Connections - Kraus Artec Pro KPF-1603 Installation Manual

Step 3: Making the water supply connections
Step 4: Making the water supply connections
1
Push the quick connector (2) rmly
upward andattach it to the receiving
block (1). Pull down moderately to
ensure the connection has been made.
If it is necessary to remove the quick
connector (2), squeeze the tabs on the
hose and then pull down to disconnect.
1
2
Thread the nut (1) on the supply line
onto the outlet of the water supply
valve and tighten with a wrench.
Do not overtighten.
6