Full Windshield - Cushman SHUTTLE 4X Technician's Repair And Service Manual

WEATHER PROTECTION
Read all of Section B and this section before attempting any procedure. Pay particular attention to Notices, Cautions, Warnings and Dangers.
B

FULL WINDSHIELD

Remove protective covering from the windshield (2)
(Ref. Fig. 3 on Page P-4).
Install sash (3) on each side of the windshield. Using a
rubber mallet, gently tap sash to ensure windshield
seats properly.
Page P-4
Insert screw (4) through washer (5), rubber grommet (6)
and existing hole in front strut. Secure with lock nut (7).
Do not over-tighten or squeeze grommet.
Place bottom section of windshield on rubber grommets
and press the sash, starting at the bottom, onto the front
strut so that it snaps into place. Repeat for opposite
side of windshield.
Front of Vehicle
6
4
Fig. 3 Full Windshield
Repair and Service Manual
2
3
7
Strut
5