Section 4 - Service; Assistance; Decontamination - Omni GLH User Manual

SECTION 4 — SERVICE

4.1 ASSISTANCE

Should this product ever require service, please contact
Omni International at 1–800–776-4431.

4.2 DECONTAMINATION

Should an instrument or component that has been used with radioac-
tive or pathogenic material require factory or field service, comply with
the following procedure to ensure the safety of service personnel:
• Clean the parts to be serviced of all encrusted material and de-
contaminate them. There must be no radioactivity detectable by
survey equipment.
• Obtain a Decontamination Certificate from Omni International.
Complete the certificate and attach to the instrument or parts
being returned.
If no Decontamination Certificate is attached, and a potential radioac-
tive or biological hazard is detected or suspected by Omni Internation-
al, the equipment will not be serviced until proper decontamination
and certification is complete. The sender will be contacted for instruc-
tions as to the disposition of the equipment. Disposition costs will be
borne by the sender.
WARNING: It is a violation of federal law to transport biologically
hazardous or radioactive materials without proper packaging, labeling,
and appropriate warnings.
14