Vimar 46910.H10A Installation And Operation Manual page 7

Index:
1. Connections......................................................................................................................................................... 6
2. Control layout ...................................................................................................................................................... 6
3. Basic on-screen display setup ............................................................................................................................. 6
4. AV / HDMI - Input Configuration ......................................................................................................................... 7
5. VGA - Input Configuration.................................................................................................................................... 8
6. Display specification ............................................................................................................................................ 9
CAUTION
- Please read this user manual carefully to ensure that you can use the device correctly and safely.
- There may be several technically incorrect places or printing errors in this manual. The updates will be added into
the new version of this manual. The contents of this manual are subject to change without notice.
- This device should be operated only from the type of power source indicated on the marking label. The voltage of
the power must be verified before using. If the device doesn't work for a long time, pull out the plug from the socket.
- Do not install this device near any heat sources such as radiators, heat registers, stoves or other device that
produce heat.
- Do not install this device near water. Clean only with a dry cloth.
- Place the device in a well-ventilated area.
- This machine is indoor using equipment. Do not expose the machine in rain or moist environment. In case any solid
or liquid get into the machine's case, please cut off the power supply immediately, and ask for qualified technicians
to check the machine before restart
- Do not try to repair the device by yourself without technical aid or approval.
This product is intended for use solely in CCTV video surveillance systems. Vimar SpA is not responsible
for any tampering with the product or for any use other than the intended use.
VIMAR group
EN
Page
5