Vga - Input Configuration - Vimar 46910.H10A Installation And Operation Manual

5. VGA - Input Configuration

5.1 Picture
5.2 OSD
5.3 Geometry
8
CONTRAST: (0–100) Set the difference between the
light and dark areas of the picture.
BRIGHTNESS: (0–100) Set how bright the display is.
COLOR TEMP: Select the color temperature Menu.
COLOR TEMP: Select color temperature preset.
USER - R: Set RED color level.
USER - G: Set GREEN color level.
USER - B: Set BLUE color level.
LANGUAGE: Select preferred language for OSD.
(En/Ch/Ger/Fr/Sp/It/Pt/Pl/Ru)
H-POSITION: (0-100) Set the horizontal position of
the OSD.
V-POSITION: (0-100) Set the vertical position of the
OSD.
DURATION: (5-60)
automatically close.
MEM-RECALL: Restore all factory defaults.
H-POSITION: Set horizontal image position.
V-POSITION: Set vertical image position.
CLOCK: Manually adjust clock synchronisation.
(If the clock setting of your image is not fine-tuned, you
may observe periodic vertical bars of video noise on
your image. These bars of noise are usually adjusted
out when an Auto Configuration is performed. If the
bars of noise are still present, this setting can be used
to remove them.
PHASE: If the phase of your monitor is not fine-tuned,
you may observe the image being unstable in the
horizontal axis. Use this option to manually correct.
AUTO ADJUST: Perform an automatic configuration
of the Phase, Clock, vertical and horizontal position.
EN
Set seconds for the OSD to