Related Manuals for Sunstream FL6 HOVERCOVER
Summary of Contents for Sunstream FL6 HOVERCOVER
- Page 1 FL6 HOVERCOVER ™ ASSEMBLY & INSTALLATION MANUAL READ CAREFULLY. KEEP INSTRUCTIONS FORM NO. 690177 REV. PAGE 1 OF 17...
-
Page 2: Table Of Contents
DO NOT OVER TIGHTEN DISCLAIMER OF LIABILITY IF YOU ARE NOT AN AUTHORIZED SUNSTREAM DEALER AND ARE NOT A REASONABLLY SKILLED MECHANIC, PLEASE CONTACT SUNSTREAM SO WE CAN REFER YOU TO A LOCAL DEALER WHO CAN SKILLFULLY AND SAFELY PERFORM THE ASSEMBLY AND INSTALLATION OF YOUR SUN- STREAM PRODUCT. -
Page 3: Assembly Instructions
BOLT, .375-16 X 3.00, HEX, SS 11-061200-16 GUIDE ON WELDMENT NUT, .375-16, NYLOCK, SS 12-060000-22 !CAUTION! ONLY SKILLED INDIVIDUALS WITH PROPER TOOLS SHOULD ASSEMBLE THE HOVERCOVER. IMPROPER ASSEMBLY MAY LEAD TO PRODUCT FAILURE, SUBSTANTIAL PROPERTY DAMAGE AND/OR PERSONAL INJURY AND VOID THE WARRANTY. - Page 4 .187" (3/16") SELF DRILLING SCREW #14-1, HEX WASH, SS 11-000401-93 9.50 FORM NO. 690177 REV. PAGE 4 OF 17...
- Page 5 OUTER LINKAGE TUBE 44-000011-38 SNAP BUTTON 15-000001-83 INNER LINKAGE TUBE 44-000011-37 FORM NO. 690177 REV. PAGE 5 OF 17...
- Page 6 PIPE, PVC, RBC OUTER GUIDE 44-000011-55 PIPE, PVC, RBC INNER GUIDE 44-000011-54 FORM NO. 690177 REV. PAGE 6 OF 17...
- Page 7 BOLT, .375-16 X 2.50, HEX, SS IMPORTANT: 11-061001-92 ENSURE FRAME BRACKET CAN PIVOT. BOLT, .375-16 X 3.00, HEX, SS 11-061200-16 FRAME BRACKET RIGHT NUT, .375-16 NYLOCK SS 12-060000-22 FRAME BRACKET LEFT BOLT, .375-16 X 2.50, HEX, SS BOLT, .375-16 X 3.00, HEX, SS 11-061001-92 11-061200-16 FORM NO.
- Page 8 BOLT, .375-16 X 2.75, HEX, SS 11-061100-15 NUT, .375-16, NYLOCK, SS 12-060000-22 FORM NO. 690177 REV. PAGE 8 OF 17...
- Page 9 5.00 7.00 5" 7" VELCRO STRAP W/ GROMMET 69-000001-00 5" 5" 7" 5" NUT, 0.3125, NYLOCK, SS 12-050000-62 MACHINE SCREW, 5/16 X 3.5, ROUND HEAD SLOTTED USE TO SECURE RAFTER STRAP 11-051401-90 MACHINE SCREW, .3125-18 X 3, ROUND HEAD SLOTTED 11-051201-91 FORM NO.
- Page 10 HOVERCOVER RAFTER ASSEMBLY 94-000008-14 VELCRO STRAP W/ GROMMET 69-000001-00 RECOMMENDED USE Loctite 262 SELF THREADING SCREW, #14-10 X 4", OVAL HEAD, SS 11-041602-40 FORM NO. 690177 REV. PAGE 10 OF 17...
- Page 11 FORM NO. 690177 REV. PAGE 11 OF 17...
- Page 12 FORM NO. 690177 REV. PAGE 12 OF 17...
- Page 13 FORM NO. 690177 REV. PAGE 13 OF 17...
- Page 14 NUT, NYLOCK, 5/16 X 3 12-050000-62 MACHINE SCREW, 5/16 X 3 11-051401-90 Ø.312" (5/16") FORM NO. 690177 REV. PAGE 14 OF 17...
-
Page 15: Height Adjustment
HEIGHT ADJUSTMENT Height of the HoverCover is adjusted with the Telescoping Linkages. The HoverCover has four preset positions incrementing every six inches. Figures below show the height clearances for the HoverCover. Dimension “A” is the distance between the bottom of the boat and the frame of the Hover- Cover when the lift is in the up position. -
Page 16: Important Safety Instructions
PVC Guide. 4. Check Velcro connections from time to time to ensure a continued tight fit. 5. Report evidence of excessive wear and tear to your Sunstream dealer or to Sunstream. 6. Remove canopy cover before snowfall. -
Page 17: Standard Warranty
FORM NO. 690177 REV. PAGE 17 OF 17...
Need help?
Do you have a question about the FL6 HOVERCOVER and is the answer not in the manual?
Questions and answers