Load a Memory Card
The VersaView 200R computer has a CompactFlash slot for loading
memory cards.
Follow these steps to load a card in the CompactFlash slot of a
VersaView 200R computer.
1. Locate the CompactFlash slot on the front of the computer.
2. Remove the CompactFlash cover by removing the screw on each
side of the cover.
3. Insert the card into the card slot until it is firmly seated.
Do not force the card into the slot. Forcing the card into the slot
ATTENTION
may damage the connector pins.
4. Reattach the CompactFlash cover by using the two screws on
each side.
Replace System Components
Publication 6155R-UM001G-EN-P - July 2007
47