Table of Contents
Advertisement
20 Industrial Non-display Computers
Load the System Defaults
If the computer fails after you make changes in the Setup menus, restart the computer, enter
Setup, and load the system default settings to correct the error. These default settings have been
selected to optimize your computer's performance.
Follow these steps to load the system defaults.
1. Restart the computer in a normal manner.
2. During POST, press F2 to access the Setup Utility.
3. Press F9 to load the default values.
4. Press F10 to save the changes you made and close the Setup Utility.
Transport the Product
If you need to ship the product via common carrier or otherwise transport it to another location,
you must first uninstall the product and place it in its original packing material.
ATTENTION: Do not ship or transport the product when it is installed in a machine, panel, or rack.
Doing so may cause damage to the product. You must uninstall the product and place it in its
original packing material before shipping. Rockwell Automation is not responsible for damage
incurred to a product that is shipped or transported while installed in a machine, panel, or rack.
Rockwell Automation Publication 6177R-IN001G-EN-P - July 2013
Advertisement
Table of Contents
