Allen-Bradley 6155R-NSXPH User Manual page 22

22 Installation
Publication 6155R-UM001G-EN-P - July 2007
Mount the Computer on a Wall
You can mount the VersaView 200R computer on a wall inside a
machine by using mounting brackets. The brackets secure the
computer to the wall.
1. Attach the two mounting brackets to the rear of the computer
by using four of the provided, M3 x 12 mm panhead screws;
torque to 0.678 Nm (6 lb-in).
2. Drill four holes in the wall that correspond to the holes in the
mounting brackets.
Dimensions are in mm (in.).
204.20 [8.04]
192.20 [7.57]
172.20 [6.78]
3. Position the computer against the wall, aligning the holes in the
mounting brackets with the holes in the wall.
Support the computer with a shelf or other means to make
TIP
installation at the appropriate height easier.
4. Insert the remaining screws through the mounting bracket into
the wall and tighten.
For the VersaView 200R computer, use four M3 x 5 mm,
panhead screws.