Allen-Bradley 6155R-NSXPH User Manual page 43

Install a Hard Disk Drive in the 200R Computer
Follow these steps to install a hard disk drive in the VersaView 200R
computer.
1. Connect the IDE ribbon cable to the hard disk drive.
2. Place the hard disk drive into the bracket and secure it by using
the four screws; torque to 0.452 Nm (4 lb-in).
3. Gently slide the hard disk drive assembly into the bracket.
4. Secure the hard drive carrier by fastening the four screws to the
bottom of the enclosure and torque to 0.678 Nm (6 lb-in).
Replace System Components
Publication 6155R-UM001G-EN-P - July 2007
43