42
Replace System Components
Publication 6155R-UM001G-EN-P - July 2007
Remove the Hard Disk Drive on the 200R Computer
Follow these steps to remove the hard disk drive of the VersaView
200R computer.
1. Disconnect power from the computer.
2. Remove the four screws from the bottom of the enclosure that
secure the hard disk drive assembly.
3. Pull the handle to slide the hard disk drive carrier out of the
enclosure.
4. Remove the four screws that hold the hard disk drive to the
bracket.
5. Lift the hard disk drive out of the carrier.
6. Disconnect the IDE ribbon cable from the hard disk drive.