Table of Contents
Advertisement
Troubleshooting
If a problem occurs with the camera, first refer to this Troubleshooting
Guide. If this Troubleshooting Guide does not resolve the problem, contact
your dealer or nearest Canon Service Center.
Power-Related Problems
Batteries cannot be charged with the charger.
Do not use any battery packs other than a genuine Canon Battery Pack
z
LP-E17.
The charger's lamp blinks at high speed.
If (1) the battery charger or battery has a problem or (2) communication
z
with the battery failed (with a non-Canon battery pack), the protection
circuit will stop charging, and the charge lamp will blink in orange. In
the case of (1), unplug the charger's power plug from the power outlet.
Detach and reattach the battery to the charger. Wait a few minutes, then
reconnect the power plug to the power outlet. If the problem persists,
contact your dealer or nearest Canon Service Center.
The charger's lamp does not blink.
If the internal temperature of the battery attached to the charger is
z
high, the charger will not charge the battery for safety reasons (lamp
off). During charging, if the battery's temperature becomes high for any
reason, charging will stop automatically (lamp blinks). When the battery
temperature goes down, charging will resume automatically.
562
Advertisement
Table of Contents
