Table of Contents
Advertisement
Setting the White Balance
If the exposure obtained in step 1 differs greatly from the standard exposure, a
o
correct white balance may not be obtained.
The following images cannot be selected: Images captured with the Picture
o
Style set to [Monochrome], multiple-exposure images, cropped images, and
images shot with another camera.
Instead of shooting a white object, you can also shoot a gray chart or standard
o
18% gray reflector (commercially available).
[ P ] Setting the Color Temperature
A value can be set representing the white balance color temperature.
When setting the color temperature for an artificial light source, set the white
o
balance correction (magenta or green bias) as necessary.
If you set [ P ] to the reading taken with a commercially available color
o
temperature meter, take test shots and adjust the setting to compensate
for the difference between the color temperature meter's reading and the
camera's color temperature reading.
144
1
Select [z: White balance].
2
Set the color temperature.
Select [ P ].
z
Turn the < 6 > dial to set the desired
z
color temperature, then press < 0 >.
The color temperature can be set from
z
approx. 2500K to 10000K in 100K
increments.
Advertisement
Table of Contents
