Table of Contents
Advertisement
Setting the Date, Time, and Time Zone
When you turn on the power for the first time or if the date/time/zone have
been reset, follow the steps below to set the time zone first.
By setting the time zone first, you can simply adjust this setting as needed
in the future and the date/time will be updated to match it.
Since the captured images will be appended with the shooting date
and time information, be sure to set your date/time.
374
1
Select [5: Date/Time/Zone].
2
Set the time zone.
Use the < Y > < Z > keys to select [Time
z
zone].
Press < 0 >.
z
Use the < W > < X > keys to select the
z
time zone, then press < 0 >.
If your time zone is not listed, press the
z
< M > button, then set the difference
from UTC in [Time difference].
Advertisement
Table of Contents
