Table of Contents
Advertisement
Turning on the Power
Setting the Date, Time, and Time Zone
If you turn on the power switch and the date/time/zone setting screen
appears, see = 374 to set the date/time/zone.
Changing the Interface Language
To change the interface language, see = 377.
Automatic Sensor Cleaning
Sensor cleaning, which may make a small noise, is performed
z
automatically whenever you set the power switch to < 2 > or attach
or detach lenses. To enable automatic sensor cleaning when the power
switch is set to < 1 > as well, you can set this in [ 5 : Sensor cleaning]
( = 383).
If you set the power switch to < 2 > while an image is being recorded to
o
the card, [Saving...] will be displayed and the power will turn off after the
recording finishes.
46
< 1 >
z
The camera turns on.
< 2 >
z
The camera is turned off and does not
function. Set the power switch to this
position when not using the camera.
Advertisement
Table of Contents
