Introduction; Carrier Compatibility - NPK M20S Instruction Manual

INTRODUCTION

Thank you for your purchase of an NPK attachment. NPK prides itself in the design
and manufacture of high quality attachments. The quality workmanship and materials,
which go into all of our attachments, will provide maximum service life. With proper
care and use, your NPK attachment should provide you with many years of productive
service.
The purpose of this manual is to provide you with information and instructions required
to properly operate and maintain the M20, M28, or M38 MATERIAL PROCESSOR.
This will result in maximum ATTACHMENT reliability and productivity.
Read this manual thoroughly before attempting to operate, remove, disassemble,
repair, or troubleshoot the MATERIAL PROCESSOR or any of its components. For
additional information or help with any problem encountered, please contact your
authorized NPK dealer.
Follow all the safety precautions contained in this manual. Failure to follow safety
precautions can result in death, personal injury, injury to others and property
damage.
Use replacement parts sold by NPK only. NPK is not responsible for failures resulting
from alterations not approved by NPK or substitution of parts not sold by NPK.

CARRIER COMPATIBILITY

These carrier weight ranges are intended as a guideline only. Other factors, such as
stick length, counterweights, undercarriage, etc., must be taken into consideration.
Mounting a MATERIAL PROCESSOR that is too heavy for the carrier can be
dangerous and damage the carrier.
PROCESSOR before transport or operation.
Mounting a MATERIAL PROCESSOR that is too small for the carrier can damage the
MATERIAL PROCESSOR and void warranties.
Engineering for specific detailed information.
PROCESSOR
MODEL
M20
M28
M38
Specifications subject to change without notice.
Verify carrier stability with the MATERIAL
RECOMMENDED CARRIER WEIGHT RANGE
3rd member mounting
US ton
20 - 25
25 - 40
33 - 55
- -
9
Please consult NPK Service or
(Metric ton)
(18 - 23)
(23 - 36)
(30 - 50)