M-Series Jaw Identification - NPK M20S Instruction Manual

M-SERIES JAW IDENTIFICATION

All M-Series Material Processor jaws are shipped from NPK with the following
information welded on them:
1. Letter designating jaw type, i.e., C, G, K, S.
2. Number denoting male or female jaw.
NOTE: Even numbers indicate male jaws, odd numbers indicate female jaws.
This information is welded onto the jaws in the location shown below:
SCRAP PROCESSING
These two items will aid in identifying the exact required parts when ordering.
For questions, please contact the NPK Service Department at 1-800-225-4379.
"C" STYLE
COMBO CUTTER
"K" STYLE
DEMOLITION
"G" STYLE
SECONDARY/PRIMARY
DEMOLITION
"S" STYLE
PRIMARY DEMOLITION
- -
26