Hydraulic Installation; Hydraulic Kits; Flow Direction - NPK M20S Instruction Manual

HYDRAULIC INSTALLATION

HYDRAULIC KITS

NPK Hydraulic Installation Kits are available for virtually all compatible backhoe
loaders, excavators, and skid steers. Complete parts and instructions for the hydraulic
installation of the NPK Material Processor, including valves, electrical or manual
controls, hoses and fittings, boom and stick piping and clamps are provided.
Combination kits that can be used for hydraulic hammer or compactor/driver operation
are available.
See your NPK dealer for details or call NPK direct at 1-800-225-4379.

FLOW DIRECTION

(All NPK Hydraulic Kits)
The hydraulic flow to close (m3) the Material Processor jaws is on the left side of the
carrier (looking from the operator's seat) and to open (m4) the jaws is on the right.
- -
40