GENERAL MAINTENANCE
REFER TO IMPORTANT SAFETY INFORMATION SECTION
DAILY INSPECTION AND MAINTENANCE
The functions the Material Processor performs are demanding in tough environments.
Therefore, it is extremely important that the following maintenance and inspection
procedures be performed daily.
Grease all lubrication points! Use moly EP2 or equivalent grease. For lubrication
points, see "GENERAL MAINTENANCE", "LUBRICATION POINTS".
Check for oil leaks at the cylinder piston rod (c3), the machined surfaces (145) and
at all of the Material Processor's hose and fitting connections (hf1).
-
-
59