JAW SET INTERCHANGE
DETACHMENT OF THE JAWS FROM THE CYLINDER SUB-
ASSEMBLIES
5. Support the top cylinder sub-assembly (c11) with a wood block (t20) to prevent it
from falling and potential damage when the cylinder jaw pin (c9) is removed.
6. Early units: Begin with either of the cylinder jaw pins. Using a hex key socket
(t42), remove the two socket head cap screws (OO) that secure the cylinder pin lock
plate.
Later units: Begin with either of the cylinder jaw pins. Using a hex key socket (t42)
remove the socket head bolt (OO) that secures the cylinder pin lock plate.
EARLY UNITS
LATER UNITS
-
-
113