Base Installation
Align the column with the
GB
FITTING THE BASE
groove on the base and
Align the stand with the groove of the foot and fasten them together using the wing nut.
fix them together using a
Tip - remove part 1 and 2 prior to installation.
right-angle bolt.
INSTRUCTIONS FOR USE
Considerate Hint:
INSTRUCTIONS FOR USE
Instructions for operation of body
Remove ①②parts from the
component before performing
installation.
MAINTENANCE INSTRUCTION
The fan requires little maintenance. Do not try to fix it by yourself. Refer it to
qualified service personnel if service is needed.
AIR
Regulator Knob
①
Horizontal Swing
②
Pull-up for static
Push-down to swing
Swing Pull-knob
8
Neck
Pole
2 2