Icom IC-F610 Instruction Manual page 14

D User set mode
User set mode is accessed at power ON and allows you to
set seldom-changed settings. in this case you can "cus-
tomize" transceiver operation to suit your preferences and
operating style.
Entering the user set mode:
qWhile pushing and holding [
the user set mode ON, allowing you to set seldom-changed
settings.
wPush [P 0] to select the appropriate item. Then push [
and [ ] to set the desired level/mode.
Available set mode functions:
• SQL Level; 0 to 255
• Audio Filter; 3000, 3400, 0 or 300
• Beep Level; 1 to 5 or Link
• Back Light; AUTO, DIM, OFF or ON
• AF Min level; 0 to 255
• Mic Gain; 1 to 5
• Beep; ON or OFF
e Push [K
] again to exit set mode.
I
] and [ ], push [K ] to turn
I
(links to audio output level)
]
2
OPERATION
10