Subscribe to Our Youtube Channel
Related Manuals for Kramer VS-211H2
Summary of Contents for Kramer VS-211H2
- Page 1 USER MANUAL MODEL: VS-211H2 Automatic HDMI Standby Switcher P/N: 2900-300581 Rev 3 www.kramerAV.com...
-
Page 2: Table Of Contents
Kramer Electronics Ltd. Contents Introduction Getting Started Overview Defining the VS‑211H2 Automatic HDMI Standby Switcher Connecting the VS‑211H2 Connecting the REMOTE Terminal Block Connector Setting the VS-211H2 DIP-Switches and Operation Technical Specifications VS-211H2 – Contents... -
Page 3: Introduction
Safety Instructions Caution: There are no operator serviceable parts inside the unit. Warning: Use only the Kramer Electronics power supply that is provided with the unit. Warning: Disconnect the power and unplug the unit from the wall before installing. VS-211H2 – Introduction... - Page 4 European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at www.kramerav.com/support/recycling.
-
Page 5: Overview
EDID pass thru that passes EDID signals from display to source. • DIP-switches for setting the switching mode. • ® Compact DigiTOOLS enclosure where 3 units can be rack mounted side-by-side in a 1U rack space with the optional adapter (see www.kramerav.com/product/VS-211H2). VS-211H2 – Overview... -
Page 6: Defining The Vs-211H2 Automatic Hdmi Standby Switcher
Kramer Electronics Ltd. Defining the VS-211H2 Automatic HDMI Standby Switcher This section defines the VS-211H2. Figure 1: VS‑211H2 Automatic HDMI Standby Switcher Feature Function ACTIVE INPUT LEDs (1 & Each LED lights when each input is active, both LEDs flash when no input is active. -
Page 7: Connecting The Vs-211H2
Kramer Electronics Ltd. Connecting the VS-211H2 Always switch off the power to each device before connecting it to your VS-211H2. After connecting your VS-211H2, connect its power and then switch on the power to each device. To connect the VS-211H2, as illustrated in the example in... -
Page 8: Connecting The Remote Terminal Block Connector
All automatic switching is overridden. Setting the VS-211H2 DIP-Switches and Operation When active input sources are connected to IN 1 and IN 2, the VS-211H2 switches in accordance with the DIP-switch settings on the rear of the unit. - Page 9 Manual Override: Using the REMOTE switches Controlling via the remote contact closure pushbuttons (see Figure 3) overrides all DIP-switch settings and automatic switching until the manually selected source disconnects, becomes inactive or the VS-211H2 is powered off. VS-211H2 – Connecting the VS-211H2...
-
Page 10: Technical Specifications
0.6kg (1.3lbs) approx. Accessories Included Power adapter cord Specifications are subject to change without notice at www.kramerav.com The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing Administrator, Inc. VS-211H2 – Technical Specifications... - Page 11 Electronics products, this product must be insured during shipment, with the insurance and shipping charges prepaid by you. If this product is returned uninsured, you assume all risks of loss or damage during shipment. Kramer Electronics will not be responsible for any costs related to the removal or re- installation of this product from or into any installation.
- Page 12 SAFETY WARNING Disconnect the unit from the power supply before opening and servicing For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback.
Need help?
Do you have a question about the VS-211H2 and is the answer not in the manual?
Questions and answers