Subscribe to Our Youtube Channel
Related Manuals for Kramer VS-21DPIR
Summary of Contents for Kramer VS-21DPIR
-
Page 1: User Manual
K R A ME R E LE CT R O N IC S L T D . USER MANUAL MODEL: VS-21DPIR 2x1 DisplayPort Switcher P/N: 2900-300265 Rev 3... -
Page 3: Table Of Contents
Using the Remote Control Transmitter Controlling via the REMOTE Terminal Block Connector Technical Specifications Figures Figure 1: VS-21DPIR 2x1 DisplayPort Switcher Figure 2: Connecting the VS-21DPIR 2x1 DisplayPort Switcher Figure 3: Connecting the REMOTE Input Select Connector VS-21DPIR – Contents... -
Page 4: Introduction
Introduction Welcome to Kramer Electronics! Since 1981, Kramer Electronics has been providing a world of unique, creative, and affordable solutions to the vast range of problems that confront video, audio, presentation, and broadcasting professionals on a daily basis. In recent years, we have redesigned and upgraded most of our... -
Page 5: Getting Started
Achieving the Best Performance To achieve the best performance: • Use only good quality connection cables (we recommend Kramer high- performance, high-resolution cables) to avoid interference, deterioration in signal quality due to poor matching, and elevated noise levels (often associated with low quality cables) •... -
Page 6: Safety Instructions
Kramer Electronics has made arrangements with the European Advanced Recycling Network (EARN) and will cover any costs of treatment, recycling and recovery of waste Kramer Electronics branded equipment on arrival at the EARN facility. For details of Kramer’s recycling arrangements in your particular country go to our recycling pages at http://www.kramerelectronics.com/support/recycling/. -
Page 7: Overview
Features high-resolution and rich colors, and the transport of audio and multiple video streams The VS-21DPIR is 5V DC fed and can be controlled remotely via the contact closure REMOTE input select terminal block connector or the infrared remote control transmitter. -
Page 8: Figure 1: Vs-21Dpir 2X1 Displayport Switcher
Figure 1: VS-21DPIR 2x1 DisplayPort Switcher Feature Function INPUT1 DisplayPort Connector Connects to the DP source 1 INPUT2 DisplayPort Connector Connects to the DP source 2 OUTPUT DisplayPort Connector Connects to the DP acceptor REMOTE Terminal Block Connect to a contact closure switch (see section Connectors 4.1) -
Page 9: Connecting The Vs-21Dpir
Connecting the VS-21DPIR Always switch off the power to each device before connecting it to your VS-21DPIR. After connecting your VS-21DPIR, connect its power and then switch on the power to each device. To connect the VS-21DPIR, as the example in... -
Page 10: Using The Remote Control Transmitter
Using the Remote Control Transmitter You can use the remote control transmitter to switch INPUT 1 or 2 to the output. Before doing so, set it to work with the VS-21DPIR by assigning a GROUP number. The setup parameters for the remote control transmitter are as follows: router number = 1 (default);... -
Page 11: Technical Specifications
12cm x 7.15cm x 2.44cm (4.72" x 2.44" x 0.96"), W, D, H WEIGHT: 0.3kg (0.67lbs) approx. ACCESSORIES: Power supply, bracket installation kit, IR transmitter OPTIONS: RK-3T rack adapter Specifications are subject to change without notice at http://www.kramerelectronics.com VS-21DPIR - Technical Specifications... - Page 13 For the latest information on our products and a list of Kramer distributors, visit our Web site where updates to this user manual may be found. We welcome your questions, comments, and feedback. Web site: www.kramerelectronics.com E-mail: info@kramerel.com SAFETY WARNING...
Need help?
Do you have a question about the VS-21DPIR and is the answer not in the manual?
Questions and answers