Bowflex TreadClimber TC10 Service Manual page 22

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from
!
the wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the
power cord in a secure location.
1. Unplug the power cord from the machine and wait 5 minutes.
2. Disconnect the Upper Input/Output (I/O) Cable.
3. Remove the 14 indicated Phillips head screws securing the Console Top
with Electronics to the Console Shroud.
4. Carefully remove the Console Top with Electronics from the front of the
Console Shroud.
5. Install the new Console Top with Electronics.
6. Reinstall the 14 Phillips head screws.
7. Connect the Upper I/O Cable.
8. Final Inspection
Inspect your machine to ensure that all hardware is tight and components are properly assembled.
Do not use until the machine has been fully assembled and inspected for correct performance in accordance with the Owner's Manual.
22