Maintenance - brondell Swash 1000 Owner's Manual

Hide thumbs Also See for Swash 1000:
Table of Contents

Advertisement

MAINTENANCE

Seat Cleaning and Removal
Important:
Unplug the Swash from the power source before cleaning or removing the seat.
Use a soft, damp cloth and mild cleanser (such as dish soap, Simple Green or Windex) to
wipe down the seat. DO NOT scrub or use harsh, abrasive products to clean the Swash. DO
NOT use thinner, benzene, acidic chemicals, chloride, or hydrochloric acid detergent. This
may result in corrosion to the metal parts or discoloration or scratches to the bidet body.
For a more thorough cleaning, you may remove the Swash. To remove the seat, press the Quick
Release button on the left side of the Swash (slightly below & behind the Bidet Hose inlet on
the seat) and slide the seat forward off of the mounting plate and toilet.
Nozzle Cleaning
Press the Nozzle Cleaning button on the Auxiliary Control panel on the
side of the Swash. The front wash nozzle will fully extend. Gently clean
the nozzle with a soft cloth or toothbrush.
Press Nozzle Cleaning button again and the front wash nozzle will retract
and rear wash nozzle will fully extend. Gently clean the nozzle with a soft
cloth or toothbrush.
Press Nozzle Cleaning button a third time and rear nozzle will retract back into seat. Take care
when cleaning the nozzles not to apply too much pressure to avoid damaging the nozzle system.
Cleaning Mesh Filter
Cleaning intervals will differ depending on use and water quality. It is recommended to
check the filter at least once every year.
Turn off the water supply, unplug the Swash and remove seat from toilet using Quick
Release button on left side of unit (slightly below & behind the bidet
hose inlet).
Remove Mesh filter by turning with a Phillips head screw driver.
Clean the filter with toothbrush while running under tap water to
effectively remove any foreign substances or build up.
Replace Mesh filter and carefully check that it is installed properly.
If improperly installed, it could result in the product leaking. Replace
seat and turn water supply back on.
20

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents