brondell Swash 1000 Owner's Manual page 20

OPERATION
(If no buttons on the Remote control are pressed for approximately 5 seconds, the
remote display lights are turned off to conserve remote battery life).
Selecting/Cancelling Eco Mode
1.
Press and hold down the "Power" and "Rear Cleansing" auxiliary buttons
simultaneously for approximately 5 seconds until all the seat display lights start flashing.
2. Press the "Rear Cleansing" button to Set or Cancel Eco Mode.
a. If Eco Mode indicator light is turned on, this indicates Eco Mode has been set.
b. If Eco Mode indicator light is turned off, this indicates Eco Mode has been cancelled.
3. The new setting will automatically be saved within 10 seconds if no other buttons are pressed.
Selecting/Cancelling Silent Mode
1. Press and hold down the "Power" and "Rear Cleansing" auxiliary buttons simultaneously for
approximately 5 seconds until all the seat display lights start flashing.
2.
Press the "Power" button to Set or Cancel silent mode.
a. If Power indicator light is turned on, this indicates silent mode has been set.
b.
If Power indicator light is turned off, this indicates silent mode has been cancelled.
3.
The new setting will automatically be saved within 10 seconds if no other buttons are pressed.
Selecting/Cancelling Seat Sensor Lock Mode
This function bypasses the body sensor located in the seat and allows the wash functions and
dry functions to operate without the sensor being engaged. Use caution in this mode!
1. Press and hold down the "Power" and "Rear Cleansing" auxiliary buttons simultaneously for
approximately 5 seconds until all the seat display lights start flashing.
2. Press the "Nozzle Cleaning" button to Set or Cancel seat sensor lock mode.
a. If Seat Temp. indicator light is turned on, this indicates seat sensor lock mode has
been set.
b. If Seat Temp. indicator light is turned off, this indicates seat sensor lock mode has
been cancelled.
3.
The new setting will automatically be saved within 10 seconds if no other buttons are pressed.
18