brondell Swash 900 Owner's Manual
Heated seat
Hide thumbs
Also See for Swash 900:
- Owner's manual (28 pages) ,
- Owner's manual (60 pages) ,
- Owner's manual (31 pages)
Related Manuals for brondell Swash 900
Summary of Contents for brondell Swash 900
-
Page 2: Troubleshooting
Section 1 Product Features page 1 Section 2 Safety Precautions page Section 3 Section 4 Installation page 10-13 Section 5 Operation page 14-20 Section 6 page Section 7 Maintenance page 22-23 Section 8 Troubleshooting page 24-25 Section 9 Warranty Information page 26-27... - Page 3 S900 and S1000 Models: S1000 Models - Additional Features...
- Page 4 SAVE THESE INSTRUCTIONS...
- Page 6 SAVE THESE INSTRUCTIONS...
- Page 7 SAVE THESE INSTRUCTIONS...
-
Page 8: Extension Cord
GROUNDING & GFI OUTLET INSTRUCTIONS Ground GFI Outlet Bidet Seat Cord with Grounding Pin Grounding Pin test reset Receptacle DANGER- Improper use of the grounding plug can result ina risk of electric shock. • • Extension cord If it is necessary to use an extension cord, use only a three wire extension cord with a threeblade grounding plug, and a three-slot receptacle that will accept the plug of the product. - Page 9 The S900 and the S1000 have the following dimensions: The S900 and 1000: Round Size The S900 and 1000: Elongated Size...
- Page 11 S900 S1000...
- Page 13 The T-Valve connects to the ll valve directly under your toilet tank - it does not connect at the wall. Only connect cold (from your toilet water supply line).
- Page 14 opening in the mounting plate and insert mounting bolts through adjustable brackets and mounting holes. Be sure that the square mounting bolt head is even with sides of adjustable bracket.
- Page 18 Use this button to engage 3 levels of the warm air dryer. S1000 models only This button engages the oscillation function on the front or rear nozzles moves the wash wand back and forth to during a wash cycle. Nozzle oscillation moves the wash wand back and forth to clean a wider area.
- Page 20 Move (Nozzle Oscillation) Function – S1000 Only Warm Air Dryer – S1000 Only...
- Page 21 Warm Air Dryer Temperature – S1000 Only Deodorization – S1000 Only To activate the deodorizer, press the Deodorize button on the remote control. The deodorizing function will run on high for approximately 1 minute. To stop the function prior to 1 minute, press STOP button at any time. Nozzle Sterilization –...
- Page 22 been cancelled. The body sensor in the seat is now bypassed and the wash & air dry functions will work without anyone physically on the seat. Use caution!
- Page 23 0.1 MPa (14.5 psi) – 0.69 MPa (100.07 psi)
- Page 28 S900 Models S1000 Models...
- Page 31 MEMO...
- Page 32 1214563...
Need help?
Do you have a question about the Swash 900 and is the answer not in the manual?
Questions and answers
The seat has cracked, how do I dissasemble to replace Bronell 900
To disassemble the Brondell 900 to replace a cracked seat:
1. Unplug the unit from the power outlet.
2. Locate the quick-release button (bouton de déverrouillage rapide) on the side of the seat.
3. Press the quick-release button and slide the seat off the mounting plate.
4. If needed, adjust or remove the mounting plate by loosening the barrel nuts under the toilet bowl.
To install the new seat, slide it onto the mounting plate until it clicks into place. Adjust the position if necessary and re-tighten the barrel nuts.
This answer is automatically generated