Mode Indicator Led, L6 Only - Wireless Solution W-DMX TRX Implementation Manual

7.1.6 Mode Indicator LED, L6 only

The Mode LED indicates whether the W-DMX device is currently operating in G3, G4, G4S
2.4GHz or G4S 5.8GHz mode.
G4S 5.8 GHz mode: on 500ms / Off 500ms
The LED is active high, and should be connected between pin J1:9 and ground, for example at
pin J1:7, via a series resistor.
The LED output can deliver a maximum of 15mA. For the average LED a series resistor of
330ohms will work well.
Revision 4 Wireless Solution Sweden Sales AB
Stureparksvägen 7 – 451 55 Uddevalla – Sweden
Author: Anders Zellén
+46 522 511 511 Tel. +46 522 440 885 Fax.
Wirelessdmx.com sales@wirelessdmx.com
15(23) 14/11/2014